If you are buying a 1.18 inch SS304 welded wire mesh panel, confirm three points before comparing prices: the actual opening size, the stainless steel grade, and the panel quality required for your application. A 1.18 inch opening is approximately 30 mm because 1 inch equals 25.4 mm, so your inquiry should state both measurements to avoid confusion. At Shunqiang Wire Mesh, we help buyers verify these details, select suitable wire diameter and panel dimensions, and compare quotations on the same technical basis. The correct panel is not simply the lowest-priced option; it must match the required strength, corrosion resistance, fabrication method, and delivery plan.
If you want to learn more, please visit our website.
This guide is intended for importers, distributors, fabricators, contractors, and project purchasing teams sourcing stainless steel welded wire mesh panels. It is useful when a drawing specifies a 1.18 inch opening, when a buyer needs SS304 for general corrosion resistance, or when several suppliers have submitted quotations with different descriptions. I also recommend using this guide when the product will be cut, framed, bent, or installed in a demanding environment. The goal is to make the inquiry precise enough that suppliers quote comparable products.
A 1.18 inch SS304 welded wire mesh panel is a rigid sheet made by joining stainless steel wires at their intersections through welding. The stated 1.18 inch dimension normally refers to the mesh opening, but the buyer must confirm whether it means the clear opening, center-to-center spacing, or a nominal metric size. SS304 is an austenitic stainless steel commonly selected for general corrosion-resistant applications, although the appropriate grade still depends on the environment. The panel format offers a more stable, ready-to-fabricate alternative to loose rolls when flatness and repeatable dimensions matter.
Write the requirement as “approximately 1.18 inch clear opening” or “approximately 30 mm clear opening” only after confirming the measurement method. A drawing may use opening size, pitch, or wire center spacing, and these are not interchangeable. For example, a 30 mm clear opening with a 3 mm wire does not have the same pitch as a 30 mm center-to-center spacing. I recommend including a sketch or marked sample if the mesh will connect to another component.
The product name identifies the general material and opening, but it does not provide enough information for a reliable quotation. Buyers should specify wire diameter, panel length and width, edge condition, surface finish, welding requirements, and packing method. If the application involves outdoor exposure, humidity, food-related equipment, or chemical contact, describe the actual service conditions rather than relying only on the word “stainless.” This allows the supplier to identify whether SS304 is suitable or whether a different grade should be reviewed.
| Item to Confirm | Why It Matters | Recommended Inquiry Wording |
|---|---|---|
| Opening | Prevents confusion between clear opening and pitch | 1.18 inch / approximately 30 mm clear opening |
| Wire diameter | Affects rigidity, weight, cutting, and cost | State the required diameter in mm or gauge |
| Material | Determines corrosion-resistance expectations and verification needs | SS304, with available material documentation if required |
| Panel size | Influences fabrication yield, freight, and installation | Specify width, length, tolerance, and quantity |
| Surface and edges | Influences appearance, handling safety, and downstream processing | Specify welded finish, cut edges, or framed edges |
The best mesh depends on what the panel must do. In equipment guards, partitions, storage cages, and machine enclosures, the buyer usually prioritizes rigidity, opening control, safe edges, and compatibility with a supporting frame. In screening or separation applications, the opening dimension and the ability to retain or pass material may be more important than appearance. For architectural or decorative use, weld appearance, flatness, finish, and visible consistency may receive greater attention.
SS304 welded panels may be considered for indoor partitions, protective barriers, ventilation guards, shelving inserts, equipment enclosures, and general fabrication. These applications should still be evaluated for load, impact, vibration, temperature, and chemical exposure. A mesh panel is not automatically a load-bearing product, so the supporting frame and fixing method must be designed separately. If people may contact the panel, ask about sharp cut-wire ends and the required edge treatment.
SS304 can be a practical choice for many general wet or humid environments, but it is not a universal solution for every chemical or marine condition. Chloride-rich exposure, strong acids, cleaning chemicals, and elevated temperatures may require a separate material review. I advise buyers to provide the supplier with the chemical name, concentration, temperature, cleaning method, and expected exposure time. Where the environment is uncertain, a qualified engineer or materials specialist should confirm the grade before purchase.
With competitive price and timely delivery, Shunqiang Wire Mesh sincerely hope to be your supplier and partner.
Begin with the opening, wire diameter, material, panel dimensions, quantity, and intended use. State whether the 1.18 inch measurement is a clear opening or another reference dimension. Also identify whether you need plain panels, cut-to-size pieces, bent sections, framed panels, or additional fabrication. A complete request reduces the risk of receiving quotations based on different assumptions.
Ask how the supplier identifies and controls the raw material before welding. If your project requires documentation, request the material documents or inspection records that are available for the specific order rather than accepting a general product statement. You should also ask about welding consistency, panel flatness, dimensional tolerance, surface condition, and the handling of welded joints. These questions do not replace independent inspection, but they make the supplier’s quality process easier to evaluate.
A physical sample can reveal opening uniformity, wire diameter, weld appearance, and edge condition more clearly than a product photograph. If sampling is not practical, ask for a dimensioned drawing and close-up production images that correspond to the quoted specification. Compare every supplier using the same opening definition, wire size, panel size, and quantity. Do not compare a heavy-wire panel with a light-wire panel simply because both are described as 1.18 inch mesh.
Request the unit price, packing details, trade terms, payment terms, production lead time, sample policy, and any cutting or finishing charges. MOQ and lead time can vary according to material availability, panel dimensions, customization, and production scheduling, so they should be confirmed for your specific order. Freight cost is also affected by panel size, packing volume, destination, and loading method. A lower factory price may not represent a lower delivered cost if the packing or transport assumptions differ.
One common mistake is using only the product name without specifying the wire diameter or measurement method. Another is assuming that all SS304 welded mesh has the same corrosion resistance, flatness, or welding quality. Buyers also sometimes approve a sample without checking whether the production panel will use the same dimensions, finish, and packing standard. Finally, purchasing only on price can create hidden costs through excess cutting waste, unsuitable edges, delayed approval, or difficult installation.
At Shunqiang Wire Mesh, I recommend starting with a technical confirmation sheet for every 1.18 inch SS304 welded wire mesh panel inquiry. We can review the opening definition, wire diameter, panel dimensions, material requirement, surface condition, quantity, and application before preparing a quotation. For projects with special fabrication needs, we can discuss cut-to-size panels, edge treatment, framing, packing, and inspection arrangements according to the confirmed scope. Any certification, test document, sample, or inspection requirement should be agreed before order placement and supplied only when applicable to the actual product and order.
To request a quotation, send your drawing or specification together with the required quantity, destination, application, and preferred delivery schedule. If some details are not finalized, identify them as open items rather than leaving them unstated. I can then help separate confirmed specifications from assumptions and provide a more useful comparison. This approach is especially important when several suppliers are quoting different interpretations of the same 1.18 inch requirement.
The right 1.18 inch SS304 welded wire mesh panel is selected by confirming the opening measurement, wire diameter, SS304 requirement, panel dimensions, manufacturing quality, application conditions, and total procurement cost. The 1.18 inch opening is approximately 30 mm, but that figure must be defined as clear opening or pitch before production. SS304 may suit many general corrosion-resistant applications, yet the environment should be reviewed before final approval. Start your inquiry with a dimensioned specification, compare equivalent quotations, and ask Shunqiang Wire Mesh to review the technical and commercial details before you place the order.
The company is the world’s best 1.18 inch ss304 welded wire mesh panel supplier. We are your one-stop shop for all needs. Our staff are highly-specialized and will help you find the product you need.
Comments
Please Join Us to post.
0